Elevate Water Block Sealant
For sealing under compression
Specific use with termination bars and pipe boots
Lead time, up to 5 working days
Elevate Water Block available to buy online from AquaLiners Direct
Elevate Water Block is used to seal up edges and provide additional protection from water getting in behind the pond or lake liner where the seal will be under continuous compression.
It is specifically recommended for sealing behind termination bars when vertically fixing pond liner to a wall, and for around the inner edge of Pipe Flashing where it fits around a pipe. Water Block comes in tubes for use with a mastic gun making it easy to apply accurately where required.
Elevate Water Block, although safe for aquatic, animal and humans, is a solvent-based sealant and should therefore be used with care. We would recommend you read through the Water Block Technical Information Sheet before use; this covers all safety precautions to take and full instructions for use.
Size Guide
Elevate Water Block comes in single tubes.
Each tube covers approximately 3 linear meters.
Technical Specification
| Brand | Elevate Water Block |
| Use With | All EPDM liners (Firestone Elevate & SealEco) |
| Size | Tube |
| Other Sizes Available | No |
| Coverage |
3 linear metres |
| Aquatic, plant & human safe | Yes |
| Solvents | Heptane |
| Technical Information Sheet | Water Block Sealant |
| Uses |
Behind Termination Bars Pipe flashing and detailing |
You may also like
Used to stop water getting behind liner edges and seams
Use with termination bars and QuickSeam products
Lead time, up to 5 working days
Everything you need to repair small holes in your pond liner
No need for hot bonding
Lead time, up to 5 working days
Everything you need to join up to 2m of liner
Great for streams or waterfalls
Lead time, up to 5 working days