20% OFF ALL DYOFIX PRODUCTS!
Toggle Nav
My Cart

Velda Clear Control Filter with UV-C

As low as £178.27 £148.56 Was £237.70
As low as £178.27 £148.56 Was £237.70

Pressure filters for every pond

Part of our pond electricals & pond filter range

Lead time, 1-2 working days

Clear Control

The filter is the heart and soul of any pond and with continuous operation the pond inhabitants enjoy a healthy life free of dangerous toxins. If you want to install a fountain, waterfall or stream, it is important that the pond water will become and remain crystal clear. Clear Control pressure filters can withstand high pressure and the water can bridge a difference in height after the filter. The filter is very easy to install and clean.

  • Pressure filter compact and strong up to 1.5 bar
  • Multi position valve for several functions
  • UV-C lamp destroys green floating algae and germs
  • Japanese mat removes coarse dirt particles
  • Active filter carbon absorbs fine dirt particles
  • Lava grit for excellent biological filtration
  • Option: heating element in the filter
  • Option: complete set with pond pump and hose

 

The Clear Control pressure filter of Velda is a pre-eminent medium for bacterial growth, thus the decomposition of floating dirt is very effective. By installing a Clear Control pressure filter you will make your pond clearer and healthier. The Clear Control pressure filters have been equipped with several functions:

  1. Backwash. This position is used to wash away the dirt under the grate. This can be necessary if coarse particles of dirt have accumulated under the grate, as a result of which the capacity will be reduced (see dirt indicator). The water is now flowing from top to bottom, which enables the dirt to be washed away.
  2. Do not use for ponds.
  3. Pond drain. This position is used to empty the pond, should the need arise, and to wash away the dirt in the valve. To this end, you should connect a hose to the waste outflow.
  4. Filtration. The water flows through the preliminary compartment to the bottom grate and through the filter materials to the outflow.
  5. Stop. The filter does not allow water to pass through (first switch off the pump). This position is used when cleaning the pond pump, while the filter continues to be full of water. After cleaning the pump, the valve is put in the filtration position again.
  6. Bypass. This is the medication position. In this case, the water is not flowing through the filter material, thus the medicine stays in the water. However, after the medicine period, the filter material has to be rinsed.
  7. Winter. In this position, the valve mechanism will be released from pressure when the filter is not in use. This position is used by secure storage of the filter, for example in winter. In the Clear Control, a Velda Pond Heater of 300 Watt can be mounted.

 

Size Guide

Clear Control 25 + UV-C 9 Watt: Up to 10,000 litres of water

Clear Control 50 + UV-C 18 Watt: Up to 20,000 litres of water 

 

Technical Specification

Easy installation

Connect the filter to a dirty-water/pond pump for the circulation of pond water. Use a filter hose to connect the pump outlet to the inflow of the filter. Attach a second hose to the outlet of the filter for backflow to the pond. Place the filter next to the pond and lower the pump under-water. Activate the UV-C lamp and the pump by plugging them in. Read the manual first!

Write Your Own Review
You're reviewing:Velda Clear Control Filter with UV-C
Your Rating

You may also like

Elevate Lap Sealant

Used to stop water getting behind liner edges and seams

Use with termination bars and QuickSeam products

Lead time, up to 5 working days

£9.02
EPDM Pond Liner Repair Kit

Everything you need to repair small holes in your pond liner

No need for hot bonding

Lead time, up to 5 working days

£21.10
EPDM Pond Liner Joining Kit

Everything you need to join up to 2m of liner

Great for streams or waterfalls

Lead time, up to 5 working days

£25.46