Not for bonding EPDM pond liners together
Aquatic, plant and human safe
Lead time, up to 5 working days
Elevate Bonding Adhesive BA-2012 is used to attach your pond or lake liner to substrates other than another piece of liner. It can be used to bond any EPDM material (Elevate or SealEco) to wood, metal, approved insulations and masonry. Where the liner is to be fixed to a vertical face, we strongly recommend you mechanically fix the liner as well, for example using an Elevate Termination Bar, as the liner could, in certain situations, peel away from the wall or vertical face.
Elevate Bonding Adhesive, although safe for aquatic, animals and humans once dried, is a solvent-based glue and should therefore be used with care. We would recommend you read through the Bonding Adhesive Technical Information Sheet before use; this covers all safety precautions to take and full instructions for use.
Bonding Adhesive comes in 3 sizes:
1 litre | circa 2.5 m2 coverage |
2.5 litres | circa 6.25 m2 coverage |
10 litres | circa 25.0 m2 coverage |
Please be aware, when using Bonding Adhesive, both surfaces to be attached need to be completely covered with the product.
Brand | Elevate Bonding Adhesive BA-2012 |
Use With | All EPDM liners (Elevate & SealEco) |
Size | 1l, 2.5l and 10l |
Other Sizes Available | No |
Coverage |
2.35-3m2 per litre |
Aquatic, plant & human safe | Yes |
Solvents | Naphtha, cyclohexane, propylacetate, butanone |
Technical Information Sheet | Bonding Adhesive |
Uses |
Bonding EPDM to: Wood Metal Approved insulations Masonry |
Used to stop water getting behind liner edges and seams
Use with termination bars and QuickSeam products
Lead time, up to 5 working days
Everything you need to repair small holes in your pond liner
No need for hot bonding
Lead time, up to 5 working days
Everything you need to join up to 2m of liner
Great for streams or waterfalls
Lead time, up to 5 working days