A one-chamber filter system including filter media for the filtration of pond water. The water flows into the box through filter foam and a net with Filtra-Sub.
Compact box filter for ponds
Filter foam removes coarse dirt particles
Filtra-Sub for excellent biological filtration
in the set: pond pump for the circulation of pond water
in the set: filter hose to connect the pump to the filter
Maintenance
During wintertime, at temperatures below 0°C, the filter should be switched off. Clean all parts and keep them in a dry frost-free place. Not only to avoid trouble but also to ensure a high water yield, the pump needs regular maintenance. Proceed as follows:
Switch off the power supply and remove the pump from the pond. Remove the cap and open the motor case by turning the rotor holder. Remove the rotor and clean all parts using water and a soft brush. Assemble all parts in reverse order. Take care that the rubber ring will be mounted in the right way.
Open the lid and remove all parts and filter materials from the filter.
Attach the 32 mm hose socket with the sealing ring to the bottom outlet on the outside of the filter, with the elbow on the inside. Attach the white tube to the other end of the elbow, pointing upwards.
Fill the filter net with Filtra-Sub, rinse it and place it at the bottom of the filter with the rinsed filter foam on top (blue below, black on top).
Attach the inlet socket with the sealing ring to the upper inlet on the outside of the filter, with the perforated tube on the inside (and the holes pointing downwards). Saw off the unused part of the hose socket. Put the lid back on the filter.